Search found 318 matches

by Mike2459
Sun Nov 19, 2017 3:54 am
Forum: General
Topic: Ads-b and virtual radar problem
Replies: 1
Views: 2568

Re: Ads-b and virtual radar problem

This can happen if any other sdr software is running (such as SDRUno) when you attempt to run Dump1090.
by Mike2459
Fri Nov 03, 2017 10:21 pm
Forum: SDRuno
Topic: SDRUno 1.2 issues
Replies: 32
Views: 26247

Re: SDRUno 1.2 issues

The 'Loss of Cal Bug' also takes place when switching IF modes (Low-IF/Zero-IF).
by Mike2459
Tue Oct 31, 2017 1:46 am
Forum: SDRuno
Topic: SDRUno 1.2 issues
Replies: 32
Views: 26247

Re: SDRUno 1.2 issues

CW AFC does not work either. Tune to a carrier and center it in the passband in CW mode, Enable CW AFC and listen as the AFC begins driving the tuned freq. lower and lower.
by Mike2459
Mon Oct 30, 2017 6:51 pm
Forum: SDRuno
Topic: SDRUno 1.2 issues
Replies: 32
Views: 26247

Re: SDRUno 1.2 issues

It also appears that the CW mode ZAP feature is broken. It was a very useful tool in SDRUno
by Mike2459
Mon Oct 30, 2017 6:04 pm
Forum: General
Topic: Low Audio
Replies: 3
Views: 4725

Re: Low Audio

You might also try this: Right click on the speaker icon (lower right side of task bar). Select 'Open Volume Mixer' - A window similar to this should open: Volume Mixer.JPG Rx Ctrl 0-0 is the level adjustment for SDRUno. It won't appear if SDRUno is not running. Also SDRUno has it's own level contro...
by Mike2459
Mon Oct 16, 2017 7:52 pm
Forum: New Users' experiences
Topic: Audio cuts in and out
Replies: 16
Views: 18703

Re: Audio cuts in and out

I have the same problem on my Asus M5A99 motherboard computer with an AMD FX-8320E Eight-core processor @3.5 Ghz Windows 10 X64 and Windows 7 X64 (dual boot)). I disabled several of the USB ports in the BIOS it helped somewhat. (It now begins to stutter at 4MHZ Decimation 1.) I tried my SDRPlay RSP2...
by Mike2459
Wed Oct 04, 2017 4:51 pm
Forum: SDRuno
Topic: Ideas for future Updates
Replies: 33
Views: 33288

Re: Ideas for future Updates

The RSP2 does not have independent antenna gain reduction settings. If one Antenna's gain is changed, the setting is transferred to the other two antenna choices. A real and unnecessary nuisance.
by Mike2459
Mon Sep 18, 2017 5:37 pm
Forum: SDRplay related
Topic: RSP-2 antenna select via Device Control Panel?
Replies: 10
Views: 11447

Re: RSP-2 antenna select via Device Control Panel?

g1hbe: I have been able to reproduce this nasty issue in SDR# (where it is particularly bad) with all antennas disconnected from the RSP2. IMO, this is a serious compatibility issue that needs to be addressed ASAP.
by Mike2459
Thu Sep 14, 2017 5:19 pm
Forum: SDR Antennas
Topic: Newbie antenna Qs
Replies: 3
Views: 7849

Re: Newbie antenna Qs

Low/No cost lightning/surge protection: Physically disconnect antennas from the electronics when not in use
by Mike2459
Tue Sep 05, 2017 10:48 pm
Forum: SDRplay related
Topic: RSP-2 antenna select via Device Control Panel?
Replies: 10
Views: 11447

Re: RSP-2 antenna select via Device Control Panel?

I use SDR# withe the RSP2. SDR# will frequently hang when selecting the HI-Z antenna port. Once a successful selection to the HI-Z port is made (which is rare) it works fine.