Search found 217 matches

by Roger
Sun Jan 21, 2018 7:59 pm
Forum: General
Topic: RSP1A use as panadapter
Replies: 3
Views: 4830

Re: RSP1A use as panadapter

Yes the RSP can be used as a Panadapter. Some users find that HDSDR software has the best features for this application.

Read how to do it here - http://www.sdrplay.com/wp-content/uploa ... rGuide.pdf
by Roger
Thu Jan 18, 2018 1:31 am
Forum: SDRuno
Topic: SDRuno with CW Skimmer
Replies: 6
Views: 6830

Re: SDRuno with CW Skimmer

SDRuno does NOT provide IQ output to external programs so CW Skimmer will be limited to decoding CW signals in an audio (i.e. 3 kHz. channel) using a Virtual Audio Cable like VB Cable. If you use SDR-Console V3 or HDSDR they can output IQ samples to CW Skimmer and you can decode a much wider bandwid...
by Roger
Tue Jan 16, 2018 1:19 am
Forum: SDRuno
Topic: 2 minor issues
Replies: 6
Views: 4606

Re: 2 minor issues

mark: Regarding your second issue. I am running an RSP2. I have noticed that when the IF AGC is disabled merely opening the settings window in the Main panel will cause the IF AGC gain to change to a new value. For example: If you set IF AGC Gain to 20db and close the settings windows in the main p...
by Roger
Tue Jan 16, 2018 1:13 am
Forum: General
Topic: SDR Console V3 recording playback navigator window
Replies: 5
Views: 4081

Re: SDR Console V3 recording playback navigator window

If you want to record hours of IQ data you need a way to analyse the files efficiently. SDR-Console V2 is a completed project unlike V3 which is not even in beta stage yet. SDR Console V2 has a companion Data Analyser program which is very effective at graphically analysing and playing recorded IQ f...
by Roger
Fri Jan 12, 2018 7:34 pm
Forum: SDR Antennas
Topic: Antenna sharing with transceiver, what I am doing
Replies: 2
Views: 6633

Re: Antenna sharing with transceiver, what I am doing

A couple of comments.... 1. SDRUno and SDR-Console both have a mute function in the software that will operate if you have a CAT connection with the transceiver. When you push the PTT button on the transceiver it will send a Tx command via CAT to Omni-Rig which forwards it to the SDR software. The S...
by Roger
Fri Jan 12, 2018 5:47 pm
Forum: General
Topic: Console 3 hangs
Replies: 1
Views: 2192

Re: Console 3 hangs

HI, Radio is Yaesu FTdx3000. Interface to radio is USB and OmniRig software at 38k baud on COM4. The SDRPlay version 1 SDR is connected to first stage RF output. When the system loads it senses the correct radio frequency but any manual change to the radio hangs the software which stops working. Ot...
by Roger
Fri Jan 12, 2018 5:37 pm
Forum: General
Topic: RSP1A
Replies: 3
Views: 3590

Re: RSP1A

Sounds like a good setup! How are you protecting the front end of your RSP when you transmit?
by Roger
Thu Jan 11, 2018 2:31 am
Forum: New Users' experiences
Topic: New User
Replies: 10
Views: 9038

Re: New User

SDRUno is quite accurate also, especially if you use the RSP Tuner AGC, which I do not. But the user interface is horrible for spectrum analyzer use, colors are not adjustable enough, and frequency span(zoom) and FFT resolution are not continuously adjustable as they are in SDR#. Have you looked at...
by Roger
Wed Jan 10, 2018 7:47 pm
Forum: SDRplay related
Topic: RSP2 Pro HF reception question
Replies: 9
Views: 8078

Re: RSP2 Pro HF reception question

When I tried switching to Ant B my HF problem went away and I could see and hear QSOs in progress! Thank you. Now I need to write to the folks at Sdrplay to see what they have to say about my Ant A port not apparently working. Thanks again, I look forward to now implementing Omnirig and interfacing...
by Roger
Wed Jan 10, 2018 12:12 am
Forum: New Users' experiences
Topic: RSP2 and FM band sensitivity
Replies: 3
Views: 4358

Re: RSP2 and FM band sensitivity

Hello, I saw rsp2 and I would probably buy one. But I have a question: which is for FM band sensitivity 88 - 108 Mhz ? I want dx-ing with him in fm band. Thank you Here is a complete review of the RSP2 including FM sensitivity. http://www.sdrplay.com/wp-content/uploads/2017/09/QSTRSP2review.pdf An ...