SDRplay Community Forum

You sure the model you have listed in your query is correct? I can't find anything on an Icom ic-r5600

ADC Overload means the ADC is getting too much signal. That doesn't mean you will fry the input of the RSP. As long as the signal doesn't exceed the safe range the RSP is fine. +10 dBm (10mW) for short durations and 0 dBm (1mW) continuous.

In SDRUNO it is via the MAIN panel
https://www.sdrplay.com/docs/SDRplay_SD ... Manual.pdf

In SDR-Console it is via the HOME tab

In HDSDR it is via the RSP EXT/IO panel
https://www.sdrplay.com/docs/sdrplay_ex ... _guide.pdf

VSPE has a software splitter. I have used this option in the past without issues (SDRuno,ACL logger & Omnirig).
COM0COM only creates a pair but VSPE has so much flexibility
http://www.eterlogic.com/Products.VSPE.html

Have you followed the setup video and PDF guide?

Video is here
https://www.youtube.com/watch?v=fIDoNpLQ3MA

Guide is here
https://www.sdrplay.com/docs/HRDandSDRuno.pdf

If your using apps that need the same com port, You will need VSPE and setup a "splitter" in VSPE.

This was posted by a user in the SDRplay SDRuno facrbook group . This should apple to your radio as well. https://www.facebook.com/groups/sdruno/permalink/1503168959816995/ There are two ways to hook SDRuno, HRD and the Yaesu together without using COM port splitter software (which can be unreliable...

Not 100% sure (call MFJ) but I believe the MFJ-1708 original model is not rated for use in VHF but the version B 1708SDR is. It doesn't matter whether the RSP is powered on or off. It's a common misconception that not having the RSP turned on will prevent damage from excessive RF power. Removing the...

No, From the looks of it you will need a BNC FEMALE to SMA male adapter https://www.amazon.com/SMA-Male-BNC-Female-Adapter/dp/B00QPN7YYQ You can replace the supplied coax with one already terminated SMA-MALE. https://www.amazon.com/MPD-Digital-coaxial-cable-RG-58u/dp/B00APVS3JO https://imgur.com/7Xv...

I assume you want to monitor two separate areas of the spectrum using WSJT-X
You need to create 2 cables.
Each instance of Uno (x2 for dual tuner mode) should be assigned a cable (RX CONTROL/SETT button/OUT tab)

I strongly advise that you unplug the RSP while installing the ZADIG driver for the RTL. If you bind the ZADIG driver to the RSP by mistake, it's a headache and a half to undo.