Search found 137 matches

by NoelC
Mon Jun 18, 2018 2:30 am
Forum: SDRuno
Topic: bugs in sdruno
Replies: 4
Views: 11396

Re: bugs in sdruno

I can hear a change in the cutoff frequency, but I presume that's normal. You'd expect to hear higher pitches of hiss as the cutoff frequency goes farther from the base. I experimented with putting a notch filter at various points and with various widths, and I still can see no way that could affect...
by NoelC
Sun Jun 17, 2018 10:11 pm
Forum: SDRuno
Topic: bugs in sdruno
Replies: 4
Views: 11396

Re: bugs in sdruno

Try as I might, I cannot sense what you folks are talking about with the "ringing sound"...

Can you please be more specific about what settings you're choosing?

If I'm missing out on a way to improve the audio I should love to learn about it.

Thanks.

-Noel
by NoelC
Sun Jun 17, 2018 8:19 pm
Forum: SDRuno
Topic: RSP-1 and SDRUno 1.23 and newer?
Replies: 12
Views: 33432

Re: RSP-1 and SDRUno 1.23 and newer?

Audio quality is poorer with LOW IF at startup with 1.23 than with 1.22. I tuned 10.0 MHz at startup and it sounds like there's a very low (a few cycles per second) beat frequency against WWV when I start 1.23. That's not there with 1.22.

-Noel
by NoelC
Sun Jun 17, 2018 7:58 pm
Forum: SDRuno
Topic: RSP-1 and SDRUno 1.23 and newer?
Replies: 12
Views: 33432

Re: RSP-1 and SDRUno 1.23 and newer?

The LNA button is backwards, which may be at least partially responsible for the above. The display cleans up some with the [ LNA ] button lit up. Note that the IF GAIN / IF ATTEN slider is practically unresponsive if one disables the [ AGC ] button. I *might* be able to live with this for a while b...
by NoelC
Sun Jun 17, 2018 7:47 pm
Forum: SDRuno
Topic: RSP-1 and SDRUno 1.23 and newer?
Replies: 12
Views: 33432

Re: RSP-1 and SDRUno 1.23 and newer?

Second bit of feedback: SDRuno 1.23 is useless with an RSP-1 for shortwave listening. Set up the same in every way I could see, with 1.23 I find MW stations are hammering the entire shortwave band. Yes, I know there's no dedicated special MW filter in an RSP-1. However, SOMETHING is seriously wrong....
by NoelC
Sun Jun 17, 2018 6:51 pm
Forum: SDRuno
Topic: RSP-1 and SDRUno 1.23 and newer?
Replies: 12
Views: 33432

Re: RSP-1 and SDRUno 1.23 and newer?

OK, first bit of feedback... WHY don't you have code that adapts the saved settings and workspaces of one version to the next? Even if things in this or that particular window end up off a bit, I sure as heck don't relish the idea of setting everything, and I mean EVERYTHING, up again. Have you cons...
by NoelC
Sun Jun 17, 2018 6:23 pm
Forum: SDRuno
Topic: RSP-1 and SDRUno 1.23 and newer?
Replies: 12
Views: 33432

Re: RSP-1 and SDRUno 1.23 and newer?

OK, then, thank you for the support. As I mentioned, one of the selling features of software-defined radio is that the software can (and by implication WILL) improve for the same hardware. I do understand the need to sell the latest hardware, and I will most certainly buy the latest again at some po...
by NoelC
Sat May 26, 2018 2:07 am
Forum: SDRuno
Topic: SDRuno NB settings?
Replies: 1
Views: 6671

Re: SDRuno NB settings?

I've found the SDRUno Noise Blanker can work - sometimes quite well indeed... For example, we have a washing machine with a motor controller that really lights up the airwaves with RFI that's so nasty sounding I just can't stand to listen to anything when it's on, and it crosses the shortwave band! ...
by NoelC
Wed May 23, 2018 8:32 pm
Forum: SDRuno
Topic: What do you run with SDRuno?
Replies: 3
Views: 12909

Re: What do you run with SDRuno?

I like to decode digital signals and CW from time to time, and a ham friend of mine (some 300 miles distant) is often curious about what ham communications I can pick up, so I've tied speakers out to line in with a small cable and occasionally run: - FLDIGI to decode CW and rtty - I tried YAND but f...
by NoelC
Wed May 23, 2018 8:17 pm
Forum: SDRuno
Topic: RSP-1 and SDRUno 1.23 and newer?
Replies: 12
Views: 33432

RSP-1 and SDRUno 1.23 and newer?

From the tenor in another thread, it's not clear whether SDRplay is continuing to support the use of newer versions of SDRuno with older RSP hardware (I have and still like an RSP-1 very much). Nothing apparently has been done to actively break support, but apparently testing hasn't been particularl...