Filter by VRX Frequency - possible enhan
Filter by VRX Frequency - possible enhan
Hi all,
after having read a thread I tested "Filter by VRX Frequency". It is an useful function but I suggest the following small changes:
- The filter is accurate to 1Hz; if you tune at + or - 1 Hz or more from the stored frequency it does not show anything; it should be much better to have it locked to 1KHz digit (or perhaps +/- 500Hz). This way you can see that you are approaching a stored frequency.
- What about enabling Markers on the Main SP window to highlight the frequencies stored in the active bank folder of the Mem. Panel?
Thanks, 73
Alessandro I2SVA
after having read a thread I tested "Filter by VRX Frequency". It is an useful function but I suggest the following small changes:
- The filter is accurate to 1Hz; if you tune at + or - 1 Hz or more from the stored frequency it does not show anything; it should be much better to have it locked to 1KHz digit (or perhaps +/- 500Hz). This way you can see that you are approaching a stored frequency.
- What about enabling Markers on the Main SP window to highlight the frequencies stored in the active bank folder of the Mem. Panel?
Thanks, 73
Alessandro I2SVA
Reason: No reason
Re: Filter by VRX Frequency - possible enhan
I'll second that, Allesandro.
"Filter by VRX frequency" is a great feature but does require frequency "latitude" to make it really useful. Also agree that the latitude should be 0.5kHz or even 1kHz. This is very releavant in the aero band with 8.33kHz channels.
Noel.
"Filter by VRX frequency" is a great feature but does require frequency "latitude" to make it really useful. Also agree that the latitude should be 0.5kHz or even 1kHz. This is very releavant in the aero band with 8.33kHz channels.
Noel.
Reason: No reason