Feedback for version 1.0b here

Information and discussions on Spectrum Analysis
DK8KW
Posts: 6
Joined: Tue Mar 19, 2019 6:27 am

Re: Feedback for version 1.0b here

Post by DK8KW » Wed Aug 21, 2019 10:17 am

Hi,

Windows 10 Pro, 1809, German Version:

doesn't start.

Installation procedure without problem, simply the application won't start. No error message.


Vy 73

Geri, DK8KW
Last edited by DK8KW on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Psyfreak3064
Posts: 4
Joined: Fri Dec 01, 2017 8:37 am

Re: Feedback for version 1.0b here

Post by Psyfreak3064 » Wed Aug 21, 2019 10:19 am

ok, changed over to UK, time and language too. the 1b version works 😃 is a regional problem. I live in Germany.
Last edited by Psyfreak3064 on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

sdrplay
Posts: 978
Joined: Wed Jan 07, 2015 7:58 am

Re: Feedback for version 1.0b here

Post by sdrplay » Wed Aug 21, 2019 10:22 am

ok thanks - I'll pass that on to Steve.

Best regards,

SDRplay Support

Reason: No reason

G4HPW
Posts: 6
Joined: Thu Aug 31, 2017 7:29 am

Re: Feedback for version 1.0b here

Post by G4HPW » Wed Aug 21, 2019 11:39 am

Installed over the previous version and runs ok.

Locks up / crashes at seemingly random times when various parameters are changed while running.

With rsp2 pro input terminated there are spurious signals displayed which I assume are internally generated in the rsp2. How about a routine to detect these and remove them in the software as part of a calibration process.
Last edited by G4HPW on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

angazu
Posts: 12
Joined: Mon May 25, 2015 6:01 pm

Re: Feedback for version 1.0b here

Post by angazu » Wed Aug 21, 2019 1:35 pm

Hola.

I guess it is a local problem with decimal numbers: point and comma.
I changed these separators and program runs like a charm.

Best regards.
ANgazu.
Last edited by angazu on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

sdrplay
Posts: 978
Joined: Wed Jan 07, 2015 7:58 am

Re: Feedback for version 1.0b here

Post by sdrplay » Wed Aug 21, 2019 3:02 pm

Steve is aware of the issue and is working on a fix.

Best regards,

SDRplay Support

Reason: No reason

Psyfreak3064
Posts: 4
Joined: Fri Dec 01, 2017 8:37 am

Re: Feedback for version 1.0b here

Post by Psyfreak3064 » Wed Aug 21, 2019 3:57 pm

how can manually lna gain adjust ?
Last edited by Psyfreak3064 on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Brian VK6LO
Posts: 8
Joined: Tue Jan 29, 2019 11:51 pm

Re: Feedback for version 1.0b here

Post by Brian VK6LO » Thu Aug 22, 2019 12:19 am

Steve
The beta version operates on Vista apart from scrolling the centre frequency
Mouse scrolling does not change any digits however the digit/s can be hi-lighted (and flash) with the mouse and changed by keyboard arrows and also new frequency can be entered from the keyboard
Early days but looks good - thanks

Brian
Last edited by Brian VK6LO on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

someYguy
Posts: 128
Joined: Sun Apr 10, 2016 7:12 pm

Re: Feedback for version 1.0b here

Post by someYguy » Thu Aug 22, 2019 5:05 am

Version 1.0b runs okay for me. Windows 7/64.

I find that the new control for center frequency entry is actually more difficult to use. What would be much better would be a control such as that in SDRuno, SDRSharp, etc....i.e. each digit highlighted with a small line above or below the digit, and using the mousewheel and up/dn arrows to change value with automatic rollover.

I also find that at present, I like the spectrum display in SDRUno better because I can use & control FFT averaging regardless of frequency span, up to the full 10 mhz. I do realize that for large spans i.e. > 10mhz , averaging would be too slow and so that is the purpose of the new video filter. Bravo and thank you for that. Also, the spectrum display in SDRUno updates VERY quickly, even at 10mhz span. I think that SAS ver 0.9 did this also. So would be good in SAS if the display could update that quickly when using spans up to 10mhz, and then scan as it does now for spans higher than that.

Thank you Steve & SDRPlay team for your wonderful work in this. You are appreciated. :)
Last edited by someYguy on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Ralf.HN
Posts: 1
Joined: Thu Jun 07, 2018 1:33 pm

Waterfall Mode?

Post by Ralf.HN » Thu Aug 22, 2019 5:35 am

Many thanks for the new version. Unfortunately I miss the waterfall mode. Does it still exist? If so, where can I activate it?

73, Ralf
Last edited by Ralf.HN on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Post Reply