Problem with image 0.5
Posted: Wed May 15, 2019 1:54 pm
Good afternoon,
My Raspberry pi 3 is a model B build in 2015. I use a 3A power supply. I did Sudo apt-get update, upgrade and rip-update but my rsp1a is not seen by the system.
Cubic SDR says: failed to connect to device.
I saw another message like missing libraries or device.
My rsp1a works under windows 10. The Rasp model B seems to be usable with a Sdrplay.
I haven’t found any answers on Internet. Nobody reports a such issue.
Some ideas?
Thank you. 73.
Fabien
My Raspberry pi 3 is a model B build in 2015. I use a 3A power supply. I did Sudo apt-get update, upgrade and rip-update but my rsp1a is not seen by the system.
Cubic SDR says: failed to connect to device.
I saw another message like missing libraries or device.
My rsp1a works under windows 10. The Rasp model B seems to be usable with a Sdrplay.
I haven’t found any answers on Internet. Nobody reports a such issue.
Some ideas?
Thank you. 73.
Fabien