Page 1 of 1

Using the RSP1a with my Yaesu 1200.

Posted: Fri Sep 06, 2019 3:49 pm
by m3ozp1
Does anyone know where I can get instructions on how to connect my Yaesu 1200 to the RSP1A , such as what cables I need, etc and then to my computer so as to use it basically as a pan adapter?

I am new to this so any help would be appreciated.

many thanks

Chris
m3ozp

Re: Using the RSP1a with my Yaesu 1200.

Posted: Thu Sep 12, 2019 4:15 pm
by mikeladd
I know of two options using the 1200.

1: An IF buffer board fitted within the 1200
https://www.sdrplay.com/panadapter-if-i ... from-kd2c/

2: Using a TX to GND switch like the one from MFJ. The model number is MFJ1708SDR version B.
https://www.mfjenterprises.com/Product. ... 1708B-SDRS

If you go with option #2, soldering to the main board of the 1200 is not needed.