I've just installed the SoapySDR software and SDRPlay modules on my Raspberry Pi 3. Everything looks like it installed correctly. How do I launch the SoapySDR software? The github website doesn't have an end-to-end tutorial and it doesn't seem like anyone has run into this problem before :/
Thanks,
Rob
SDRPlay RSP1
Code: Select all
pi@raspberrypi:~/SoapySDR $ SoapySDRUtil --info
######################################################
## Soapy SDR -- the SDR abstraction library ##
######################################################
Lib Version: v0.7.0-ge6948134
API Version: v0.7.0
ABI Version: v0.7
Install root: /usr/local
Search path: /usr/local/lib/SoapySDR/modules0.7
Module found: /usr/local/lib/SoapySDR/modules0.7/libsdrPlaySupport.so (0.1.0-12c3db6)
Available factories... sdrplay
Available converters...
- CF32 -> [CF32, CS16, CS8, CU16, CU8]
- CS16 -> [CF32, CS16, CS8, CU16, CU8]
- CS32 -> [CS32]
- CS8 -> [CF32, CS16, CS8, CU16, CU8]
- CU16 -> [CF32, CS16, CS8]
- CU8 -> [CF32, CS16, CS8]
- F32 -> [F32, S16, S8, U16, U8]
- S16 -> [F32, S16, S8, U16, U8]
- S32 -> [S32]
- S8 -> [F32, S16, S8, U16, U8]
- U16 -> [F32, S16, S8]
- U8 -> [F32, S16, S8]
Code: Select all
root@raspberrypi:/home/pi/SoapySDR# SoapySDRUtil --probe
######################################################
## Soapy SDR -- the SDR abstraction library ##
######################################################
Probe device
----------------------------------------------------
-- Device identification
----------------------------------------------------
driver=SDRplay
hardware=B0001P0004
mir_sdr_api_version=2.130000
mir_sdr_hw_version=1
----------------------------------------------------
-- Peripheral summary
----------------------------------------------------
Channels: 1 Rx, 0 Tx
Timestamps: NO
Other Settings:
* RF Gain Select - RF Gain Select
[key=rfgain_sel, default=1, type=string, options=(0, 1, 2, 3)]
* IF Mode - IF frequency in kHz
[key=if_mode, default=Zero-IF, type=string, options=(Zero-IF, 450kHz, 1620kHz, 2048kHz)]
* IQ Correction - IQ Correction Control
[key=iqcorr_ctrl, default=true, type=bool]
* AGC Setpoint - AGC Setpoint (dBfs)
[key=agc_setpoint, default=-30, type=int, range=[-60, 0]]
----------------------------------------------------
-- RX Channel 0
----------------------------------------------------
Full-duplex: YES
Supports AGC: YES
Stream formats: CS16, CF32
Native format: CS16 [full-scale=32767]
Antennas: RX
Corrections: DC removal
Full gain range: [0, 42] dB
IFGR gain range: [20, 59] dB
RFGR gain range: [0, 3] dB
Full freq range: [0.01, 2000] MHz
RF freq range: [0.01, 2000] MHz
CORR freq range: MHz
Sample rates: 0.25, 0.5, 1, 2, 2.048, 6, 7, 8, 9, 10 MSps
Filter bandwidths: 0.2, 0.3, 0.6, 1.536, 5, 6, 7, 8 MHz