Page 1 of 1

single board computer

Posted: Mon Nov 19, 2018 8:47 pm
by Gene_50
what would a good SBC to run my SDRPlay? my old laptop is too loaded...


Re: single board computer

Posted: Tue Nov 20, 2018 2:11 am
by AussieSusan
What do you want to on the computer?

I've used a RPi 3B+ running a C program I wrote to capture the 137.0-138.0 MHz range from my SDR RSP2 and decode the NOAA FM signals that were passed to WxtoIMG. So it can at least do that.

If you want to drive a waterfall etc then you may have more of a challenge.

The new RPI3A+ has a 1.6GHz quad core ARM processor but only 512MB memory. Might be worth a look.


Re: single board computer

Posted: Tue Nov 20, 2018 7:40 pm
by mikeladd
If you want to run Windows 10... These should work well.

Intel Compute stick

Will see if I can dig up others that SDRplay users have used without issue.

Re: single board computer

Posted: Wed Nov 21, 2018 4:57 am
by Fractal1
asus tinker board? more powerful than the Rpi, runs the same software. I will be getting one soon to replace my pi. Could be worth a look.