RSP2 & NooElec 9:1 mini Balun
Posted: Sat Jan 26, 2019 8:13 pm
1) The connections from all antennas to the RSP2 & associated filtering peripherals is all coaxial cable.
2) I would like to take advantage of the LF capability of the RSP2 Port C.
3) NooElec.com sells a nifty miniature RF, 1:9 Antenna Balun, with two clamp terminals on one end, to insert pigtails.
4) This Antenna Balun assembly has an SMA, gold-plated female jack on the other end.
5) With a suitable dipole, unbalanced antenna, can the NooElec balun be used such that the SMA is
poking out of the cabinet, able to accept an antenna connector, with the clamp connections inside
the cabinet, and jumpered to the connections the green-colored Hi-Z Berg block uses?
Thank you for your help.
2) I would like to take advantage of the LF capability of the RSP2 Port C.
3) NooElec.com sells a nifty miniature RF, 1:9 Antenna Balun, with two clamp terminals on one end, to insert pigtails.
4) This Antenna Balun assembly has an SMA, gold-plated female jack on the other end.
5) With a suitable dipole, unbalanced antenna, can the NooElec balun be used such that the SMA is
poking out of the cabinet, able to accept an antenna connector, with the clamp connections inside
the cabinet, and jumpered to the connections the green-colored Hi-Z Berg block uses?
Thank you for your help.