Remotely Reset/Reboot RSP2Pro
Remotely Reset/Reboot RSP2Pro
I operate the RSP2Pro at a remote location, and I use TeamViewer to administer SDRuno and other applications on the PC.
Is there a way to reset or reboot the RSP2Pro without having to physically cycle the USB connection?
Will rebooting the PC (with RSP2Pro connected) do this?
My questions arise because, when I'm on-site, I find that cycling the USB connection and restarting SDRuno sometimes eliminates a noisy spectrum. I would like to be able to do this remotely.
Thanks!
Whit
Is there a way to reset or reboot the RSP2Pro without having to physically cycle the USB connection?
Will rebooting the PC (with RSP2Pro connected) do this?
My questions arise because, when I'm on-site, I find that cycling the USB connection and restarting SDRuno sometimes eliminates a noisy spectrum. I would like to be able to do this remotely.
Thanks!
Whit
Last edited by wreeve on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason
Re: Remotely Reset/Reboot RSP2Pro
Perhaps you could use Device Manager to disable and re-enable the RSP device when you are remotely controlling?
Reason: No reason
Re: Remotely Reset/Reboot RSP2Pro
Hi Wreeve
Sometimes I use an application called Zentimo, try it!
Regards
Tomas Gonzalez
Remote station: El Hierro Island, Canary Islands
Blog: http://feantenna.blogspot.com/
Sometimes I use an application called Zentimo, try it!
Regards
Tomas Gonzalez
Remote station: El Hierro Island, Canary Islands
Blog: http://feantenna.blogspot.com/
Reason: No reason