Page 1 of 1

Remotely Reset/Reboot RSP2Pro

Posted: Sat Mar 16, 2019 7:26 pm
by wreeve
I operate the RSP2Pro at a remote location, and I use TeamViewer to administer SDRuno and other applications on the PC.

Is there a way to reset or reboot the RSP2Pro without having to physically cycle the USB connection?

Will rebooting the PC (with RSP2Pro connected) do this?

My questions arise because, when I'm on-site, I find that cycling the USB connection and restarting SDRuno sometimes eliminates a noisy spectrum. I would like to be able to do this remotely.



Re: Remotely Reset/Reboot RSP2Pro

Posted: Wed Mar 20, 2019 1:59 pm
by JJ_in_TN
Perhaps you could use Device Manager to disable and re-enable the RSP device when you are remotely controlling?

Re: Remotely Reset/Reboot RSP2Pro

Posted: Mon Apr 22, 2019 7:52 pm
by tomas112
Hi Wreeve

Sometimes I use an application called Zentimo, try it!


Tomas Gonzalez
Remote station: El Hierro Island, Canary Islands