RSP 1 and Sodia

Post information or questions regarding SDRplay products here
Post Reply
JimPa
Posts: 5
Joined: Sat Apr 06, 2019 9:40 pm

RSP 1 and Sodia

Post by JimPa » Sun Apr 14, 2019 2:01 pm

First of thanks to all involved in releasing V1.31 of SDRuno so quickly after the problems with API driver.

While all this was happening, I was getting used to Sodia SDR V1 software for digital radio mondiale decoding

With the new API drivers I get the following error message:-

FAILED TO LOCATE API Registry entry HKEY.LOCAL.MACHINE\SOFTWARE\SDRplay\API ERROR

Has anyone found a work-around for this?
Last edited by JimPa on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

sdrplay
Posts: 960
Joined: Wed Jan 07, 2015 7:58 am

Re: RSP 1 and Sodia

Post by sdrplay » Tue Apr 23, 2019 9:29 am

If you mean Sodira, then I believe that works on an ExtIO dll - if you have RSP1, RSP1A, RSP2 or RSP2pro then you will need the API 2.13 installed. The ExtIO plugins for those devices requires it. Check that you have that version of the API installed and the latest ExtIO plugin.

Best regards,

Andy

Reason: No reason

JimPa
Posts: 5
Joined: Sat Apr 06, 2019 9:40 pm

Re: RSP 1 and Sodia

Post by JimPa » Mon Apr 29, 2019 7:01 pm

Thank you Andy

hmm, yes Sodira, not Sodia as I spelt it

I cleared out all the previous "SDRplay programs, drivers etc. when SDRuno3.1 came out, as I did not know if the drivers could be installed at the same time

SDR console version 3 needed reinstalling as I had removed all the C++ libraries as well....

Thanks again
Last edited by JimPa on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Post Reply