SDRplay Community Forum

Andy, mea culpa, Simon once told me that he uses his own API/DLL, files. I now see that this time he used the RSP API to be integrated in his code.

73' Ron

The SDRconsole does not use the SDRplay API, it uses its own. That is why the console does work. I guess that the install procedure is not folowed to the letter. One has to not have the RSP connected during the first part of the install. After this the RSP can be connected and one has to wait for th...

I just asked Simon Brown and RSP_TCP is not suported in SDRconsole. I use it and it does not listen to the Gain control but the SNR seems ok. Be aware that the auto gain is not working good and shows to much signal. The manual gain settings are a bit on the low side but this affects only the FFT and...

Could be that the image file you used could be damaged during the download

I owned a RSP1 for a few weeks and sold it to a club member who was interrested. Did not like it very much due to the lack of front end filtering. Later I got a RSP2 wich was a bit better (filtering) but the same friend also wanted it to so it went in his direction. The RSP1A is a better performer a...

I had the RSP-TCP server running within two minutes time with the latest Raspberry Pi release on a new Pi4B in combibation with a RSP1A. Have tested it with HDSDR, Sdr# and SDRconsole v3.0.12. Just install the Raspberry Pi image on your Pi and change the IP adress to the values of your system and of...

Thanks Mike! I also use a second HD for this. I do not like to record I/Q files on a HD with the W10 OS mounted. I'm using a Intel NUC8i5BEH with a Samsung 970 evo 500 Gb SSD and a WD 2Tb 2.5" HD. Want to make a Mediumwave I/Q recording with a Beverage with Tuner 1 and an experimental Lira antenna w...

Does anyone know if both the I/Q streams of the RSPduo with SDRuno can be recorded to a internal HD simultanious? A 2 MHz sample rate will be used for both receivers. I like to make recordings for comparing antennas at night on MW. An external USB 3.0 drive will also be fine but I guess the ports fr...

Hi, I have a Beverage antenna partly running 100 meter close to a electric @ 2 meters distance, so it is quite simular to your problem. This antenna is used for MW, LW and VLF. The only salvation I found for coping with the strong pulses is the Noise Blanker of SDRconsole. You can find it when going...

Hi,

Please ignore my previous message.
I got HDSDR running with the RSP_TCP server now.

Thanks for the assistance

Best regards,
Ron