Search found 206 matches
- Sun Oct 29, 2017 6:14 am
- Forum: SDR Antennas
- Topic: Best gauge of wire
- Replies: 2
- Views: 14077
Re: Best gauge of wire
As a thought provoking alternative - for several years I've been using aluminium welding wire. It is inexpensive, is available on small and large reels at diameters of typically 0.9mm and 1.2mm, has high breaking strain, is light enough to use a minimum of supports for large spans, does not corrode ...
- Mon Sep 11, 2017 2:02 am
- Forum: SDR Antennas
- Topic: How to connect a nevada EFW-1 to sdr play
- Replies: 4
- Views: 19353
Re: How to connect a nevada EFW-1 to sdr play
Hi Franko, I seem to be chasing you around (I'm not, I promise, just passionate about antennas feedlines and noise).. The HF connector on the RSP2 is specially designed as a balanced input which is a great thing and one of the major improvements over the RSP1. That's mentioned in this PDF, which you...
- Wed Sep 06, 2017 8:32 am
- Forum: Code Corner
- Topic: openwebrx working with SDRPlay RSP2 on Raspberry Pi2B
- Replies: 25
- Views: 100847
Re: openwebrx working with SDRPlay RSP2 on Raspberry Pi2B
Thanks for your interest Marco, yes you are right. My bad, the wording is really the problem as I should have said "the openwebrx software doesn't provide any options for band change" or something like that. As it happens I do have a VPN on a spare older Mac using OSX Server software to get back int...
- Wed Sep 06, 2017 7:18 am
- Forum: SDR Antennas
- Topic: Discone recommendations?
- Replies: 8
- Views: 34689
Re: Discone recommendations?
Good on you; sometimes asking creates a problem, quot capita tot sensus and I shudder to think of all the opinions being roused right now amongst this readership, the antenna topic is endless. a) any appreciable length of end fed wire is going to be a very noisy antenna. I've never ever tamed one an...
- Wed Sep 06, 2017 6:27 am
- Forum: SDR Antennas
- Topic: Discone recommendations?
- Replies: 8
- Views: 34689
Re: Discone recommendations?
The easiest thing is to work out in your own mind the best compromise between the cost of various grades of coax and connectors V's the signal loss at the frequencies you are interested in over the length of the coax run. There are lots of online coax loss calculators that work the loss out for you,...
- Wed Sep 06, 2017 4:28 am
- Forum: SDR Antennas
- Topic: Discone recommendations?
- Replies: 8
- Views: 34689
Re: Discone recommendations?
I have two, both different brands and sourced two years apart, yet are both identical. They look exactly the same as 90% of those I've seen at fellow ham shacks, they all look like this: http://www.ebay.com/itm/SIRIO-SD-1300-Discone-Antenna-25-MHz-1-3-GHz-N-Connector-/302424956113 As per the advert ...
- Mon Sep 04, 2017 7:13 am
- Forum: SDR Antennas
- Topic: Balun needed for coax fed dipole on hi-z port?
- Replies: 5
- Views: 28821
Re: Balun needed for coax fed dipole on hi-z port?
Hi Chuck, I wanted to commend your reply in particular The difference a good balun makes can be profound - as much as 20~30dB reduction in noise It sure can and it's a thrill to achieve such an improvement cheaply and easily. The word "balun" can cause confusion so I thought the simplest thing to do...
- Mon Sep 04, 2017 2:02 am
- Forum: SDR Antennas
- Topic: Long-wire performance on different ports, bands
- Replies: 5
- Views: 22051
Re: Long-wire performance on different ports, bands
I see from a tutorial video that SDRUno's main panel for the RSP1 has a prominent button for LNA. But I'm not finding it in SDRUno for RSP2. Has it been moved somewhere? The block diagram of the RSP2 shows the LNA is permanently in circuit when using Ports A and B and the only user adjustment is ga...
- Sun Sep 03, 2017 9:54 am
- Forum: SDRuno
- Topic: SDRUno will not work on VMWare FUsion
- Replies: 3
- Views: 12165
Re: SDRUno will not work on VMWare FUsion
I know I'm late to this and you may have given up or fixed it. I solved that problem by setting the SDRPlay as a USB2 device in VMWare. (BTW I'm using an RSP2) VMWare Menu: Virtual Machine > Settings... > USB & Bluetooth > [click on the SDRPlay device] > Advanced (the tiny down arrow) > USB Compatib...
- Wed Aug 16, 2017 11:45 pm
- Forum: General
- Topic: Which Windows 10 SDR Software(s) Work with the RSP2?
- Replies: 10
- Views: 39575
Re: Which Windows 10 SDR Software(s) Work with the RSP2?
@ ultravista
The SDR-Console v3 page below has a list of supported hardware, see 'radios' on the right
http://sdr-radio.com/v3_help
Will SDR-Console V3 work with the RTL-SDR V3 dongle?
The SDR-Console v3 page below has a list of supported hardware, see 'radios' on the right
http://sdr-radio.com/v3_help