Search found 318 matches
- Sun Nov 19, 2017 3:54 am
- Forum: General
- Topic: Ads-b and virtual radar problem
- Replies: 1
- Views: 6502
Re: Ads-b and virtual radar problem
This can happen if any other sdr software is running (such as SDRUno) when you attempt to run Dump1090.
- Fri Nov 03, 2017 10:21 pm
- Forum: SDRuno
- Topic: SDRUno 1.2 issues
- Replies: 32
- Views: 78505
Re: SDRUno 1.2 issues
The 'Loss of Cal Bug' also takes place when switching IF modes (Low-IF/Zero-IF).
- Tue Oct 31, 2017 1:46 am
- Forum: SDRuno
- Topic: SDRUno 1.2 issues
- Replies: 32
- Views: 78505
Re: SDRUno 1.2 issues
CW AFC does not work either. Tune to a carrier and center it in the passband in CW mode, Enable CW AFC and listen as the AFC begins driving the tuned freq. lower and lower.
- Mon Oct 30, 2017 6:51 pm
- Forum: SDRuno
- Topic: SDRUno 1.2 issues
- Replies: 32
- Views: 78505
Re: SDRUno 1.2 issues
It also appears that the CW mode ZAP feature is broken. It was a very useful tool in SDRUno
Re: Low Audio
You might also try this: Right click on the speaker icon (lower right side of task bar). Select 'Open Volume Mixer' - A window similar to this should open: Volume Mixer.JPG Rx Ctrl 0-0 is the level adjustment for SDRUno. It won't appear if SDRUno is not running. Also SDRUno has it's own level contro...
- Mon Oct 16, 2017 7:52 pm
- Forum: New Users' experiences
- Topic: Audio cuts in and out
- Replies: 16
- Views: 50672
Re: Audio cuts in and out
I have the same problem on my Asus M5A99 motherboard computer with an AMD FX-8320E Eight-core processor @3.5 Ghz Windows 10 X64 and Windows 7 X64 (dual boot)). I disabled several of the USB ports in the BIOS it helped somewhat. (It now begins to stutter at 4MHZ Decimation 1.) I tried my SDRPlay RSP2...
- Wed Oct 04, 2017 4:51 pm
- Forum: SDRuno
- Topic: Ideas for future Updates
- Replies: 33
- Views: 93277
Re: Ideas for future Updates
The RSP2 does not have independent antenna gain reduction settings. If one Antenna's gain is changed, the setting is transferred to the other two antenna choices. A real and unnecessary nuisance.
- Mon Sep 18, 2017 5:37 pm
- Forum: SDRplay related
- Topic: RSP-2 antenna select via Device Control Panel?
- Replies: 10
- Views: 30184
Re: RSP-2 antenna select via Device Control Panel?
g1hbe: I have been able to reproduce this nasty issue in SDR# (where it is particularly bad) with all antennas disconnected from the RSP2. IMO, this is a serious compatibility issue that needs to be addressed ASAP.
- Thu Sep 14, 2017 5:19 pm
- Forum: SDR Antennas
- Topic: Newbie antenna Qs
- Replies: 3
- Views: 19181
Re: Newbie antenna Qs
Low/No cost lightning/surge protection: Physically disconnect antennas from the electronics when not in use
- Tue Sep 05, 2017 10:48 pm
- Forum: SDRplay related
- Topic: RSP-2 antenna select via Device Control Panel?
- Replies: 10
- Views: 30184
Re: RSP-2 antenna select via Device Control Panel?
I use SDR# withe the RSP2. SDR# will frequently hang when selecting the HI-Z antenna port. Once a successful selection to the HI-Z port is made (which is rare) it works fine.