This thing doesn't work
-
- Posts: 1
- Joined: Wed Jul 10, 2019 4:20 pm
This thing doesn't work
I have tried everything and the program just keeps telling me that it can't find any RSP. Getting really tired and just about ready to send it back. So far I think it is nothing but JUNK! Tried the 2.0 and 3.0 usb ports. same thing.
Last edited by ReynardDriver on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason
-
- Posts: 499
- Joined: Mon Jun 01, 2015 7:00 pm
Re: This thing doesn't work
Please open a support ticket via www.sdrplay.com/support and we will try to help resolve your problem.
Sincerely
Tech_Support
Sincerely
Tech_Support
Reason: No reason
-
- Posts: 5
- Joined: Wed Jul 10, 2019 1:15 am
Re: This thing doesn't work
I experienced the same thing. At the beginning of a setup usually there is one small thing that is not configured right and no matter what you do it won't work. Hang in there, you will really enjoy using it once it gets going.
Last edited by haplessdiyer on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason
Re: This thing doesn't work
Hello !
It looks like this (japanese ?) user has some problem running his RSPduo : https://www.youtube.com/watch?v=x_1njtfrqvI
I can't believe it's that deaf, so what can be wrong ? Reducing the gain and using decimation does not help.
What to do in a similar situation ? (his previous video shows the same 'problem').
Thanks.
It looks like this (japanese ?) user has some problem running his RSPduo : https://www.youtube.com/watch?v=x_1njtfrqvI
I can't believe it's that deaf, so what can be wrong ? Reducing the gain and using decimation does not help.
What to do in a similar situation ? (his previous video shows the same 'problem').
Thanks.
Reason: No reason
Re: This thing doesn't work
It appears that the RSPDuo is overloaded and the other SDR's are not
Reason: No reason
Re: This thing doesn't work
It's difficult to spot what he's doing wrong. In the early part of the section the RSP is in overload, but later on it's not. He must be doing something wrong, as I've just tried my RSP2 under similar conditions and signal strengths and signal is perfectly readable.
I thought I'd spotted his mistake when I noticed he was receiving on the LO frequency which will have this effect in ZIF mode, but he's in LIF mode so I'm a bit stumped.
Of course we cannot discount some deliberate jiggery-pokery, some fan-boys are like that.
I thought I'd spotted his mistake when I noticed he was receiving on the LO frequency which will have this effect in ZIF mode, but he's in LIF mode so I'm a bit stumped.
Of course we cannot discount some deliberate jiggery-pokery, some fan-boys are like that.
Reason: No reason
Andy