Page 1 of 1

SDRuno to WSJT-X

Posted: Thu Jan 31, 2019 1:00 am
by LostJohn
I have set common vir com ports, speed and Kenwood TS480.
I do see Connected status but Test on WSJT-X gives error.
Should this work? Any idea what I am missing?
Machine: Win 10 i7 16 gig Like settings work OK with other radios via HPSDR

John

Re: SDRuno to WSJT-X

Posted: Thu Jan 31, 2019 8:14 pm
by Mike2459
Any other apps using CAT at the same time?

Here are my WSJT-X settings:
WSJT-X.JPG
WSJT-X.JPG (55.92 KiB) Viewed 35377 times

Re: SDRuno to WSJT-X

Posted: Thu Jan 31, 2019 11:51 pm
by LostJohn
Yes. Much like what I have. I assume that the only setting you have in SDRuno is the other end of the COM port pair.
I am using VSPM and have only re connect option set on my com-16---com-6 pair. I have tried to change the speed both up and down, matching and with system restarts. Still no joy. I will read the book to look for CAT debug.
John