Thanks for your reply. Here goes...
sdrplay wrote:What is the result of the following commands run from a terminal window...
SoapySDRUtil --info
######################################################
## Soapy SDR -- the SDR abstraction library ##
######################################################
Lib Version: v0.7.0-g69c16e98
API Version: v0.7.0
ABI Version: v0.7
Install root: /usr/local
Search path: /usr/local/lib/SoapySDR/modules0.7
Module found: /usr/local/lib/SoapySDR/modules0.7/libsdrPlaySupport.so (0.1.0-12c3db6)
Available factories... sdrplay
Available converters...
- CF32 -> [CF32, CS16, CS8, CU16, CU8]
- CS16 -> [CF32, CS16, CS8, CU16, CU8]
- CS32 -> [CS32]
- CS8 -> [CF32, CS16, CS8, CU16, CU8]
- CU16 -> [CF32, CS16, CS8]
- CU8 -> [CF32, CS16, CS8]
- F32 -> [F32, S16, S8, U16, U8]
- S16 -> [F32, S16, S8, U16, U8]
- S32 -> [S32]
- S8 -> [F32, S16, S8, U16, U8]
- U16 -> [F32, S16, S8]
- U8 -> [F32, S16, S8]
SoapySDRUtil --find=sdrplay
######################################################
## Soapy SDR -- the SDR abstraction library ##
######################################################
Found device 0
driver = sdrplay
label = SDRplay Dev0 RSP2 1707032C20
SoapySDRUtil --probe=sdrplay
######################################################
## Soapy SDR -- the SDR abstraction library ##
######################################################
Probe device sdrplay
----------------------------------------------------
-- Device identification
----------------------------------------------------
driver=SDRplay
hardware=1707032C20
mir_sdr_api_version=2.130000
mir_sdr_hw_version=2
----------------------------------------------------
-- Peripheral summary
----------------------------------------------------
Channels: 1 Rx, 0 Tx
Timestamps: NO
Other Settings:
* RF Gain Select - RF Gain Select
[key=rfgain_sel, default=4, type=string, options=(0, 1, 2, 3, 4, 5, 6, 7, 8)]
* IF Mode - IF frequency in kHz
[key=if_mode, default=Zero-IF, type=string, options=(Zero-IF, 450kHz, 1620kHz, 2048kHz)]
* IQ Correction - IQ Correction Control
[key=iqcorr_ctrl, default=true, type=bool]
* AGC Setpoint - AGC Setpoint (dBfs)
[key=agc_setpoint, default=-30, type=int, range=[-60, 0]]
* ExtRef Enable - External Reference Control
[key=extref_ctrl, default=true, type=bool]
* BiasT Enable - BiasT Control
[key=biasT_ctrl, default=true, type=bool]
* RfNotch Enable - RF Notch Filter Control
[key=rfnotch_ctrl, default=true, type=bool]
----------------------------------------------------
-- RX Channel 0
----------------------------------------------------
Full-duplex: YES
Supports AGC: YES
Stream formats: CS16, CF32
Native format: CS16 [full-scale=32767]
Antennas: Antenna A, Antenna B, Hi-Z
Corrections: DC removal
Full gain range: [0, 47] dB
IFGR gain range: [20, 59] dB
RFGR gain range: [0, 8] dB
Full freq range: [0.01, 2000] MHz
RF freq range: [0.01, 2000] MHz
CORR freq range: MHz
Sample rates: 0.25, 0.5, 1, 2, 2.048, 6, 7, 8, 9, 10 MSps
Filter bandwidths: 0.2, 0.3, 0.6, 1.536, 5, 6, 7, 8 MHz
ioreg -p IOUSB
+-o Root <class IORegistryEntry, id 0x100000100, retain 14>
+-o Root Hub Simulation Simulation@fd000000 <class AppleUSBRootHubDevice, id$
| +-o Built-in iSight@fd400000 <class AppleUSBDevice, id 0x10000024f, regist$
| +-o IOUSBHostDevice@fd100000 <class AppleUSBDevice, id 0x100000704, regist$
+-o Root Hub Simulation Simulation@5d000000 <class AppleUSBRootHubDevice, id$
| +-o IR Receiver@5d100000 <class AppleUSBDevice, id 0x10000028c, registered$
| +-o Apple Internal Keyboard / Trackpad@5d200000 <class AppleUSBDevice, id $
+-o Root Hub Simulation Simulation@1a000000 <class AppleUSBRootHubDevice, id$
+-o IOUSBHostDevice@1a100000 <class AppleUSBDevice, id 0x1000002c5, regist$
I'll wait for your comments on the above before taking the matter any further.
73
Ralf