WSJT-X configuration

General discussions
Post Reply
ZFCBSLR
Posts: 1
Joined: Sun Aug 11, 2019 7:18 pm

WSJT-X configuration

Post by ZFCBSLR » Sun Aug 11, 2019 7:25 pm

Hi Gang, I have seen all the you tubes about using the SDR uno with WSJT X, But no step by step set up, like what rig do i select for the WSJT X program.
I have VSPE loaded, but dont know how to set it on SDR UNO any assistance Snip its WSJTX-X for SDR UNO dummies..
thanks regards, Ed
Last edited by ZFCBSLR on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

User avatar
mikeladd
Posts: 191
Joined: Wed Jul 08, 2015 3:18 am

Re: WSJT-X configuration

Post by mikeladd » Sat Aug 17, 2019 2:01 pm

You need to create a comport pair in VSPE
ie: COM 1 / 2, COM 3/4 or COM 5/6.
Image

Set SDRuno up to use the first number of the VSPE comport pair
ie: 1, 3 or 5 within the RX CONTROL and enable it.
Image

Set WSJT-X to use a Kenwood TS480 rig and assign it the second number of the VSPE comport pair
ie: 2, 4 or 6
Image

Also explained here.
viewtopic.php?t=2547#p7727

Reason: No reason

Post Reply