Does anyone know where I can get instructions on how to connect my Yaesu 1200 to the RSP1A , such as what cables I need, etc and then to my computer so as to use it basically as a pan adapter?
I am new to this so any help would be appreciated.
many thanks
Chris
m3ozp
Using the RSP1a with my Yaesu 1200.
Using the RSP1a with my Yaesu 1200.
Last edited by m3ozp1 on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason
Re: Using the RSP1a with my Yaesu 1200.
I know of two options using the 1200.
1: An IF buffer board fitted within the 1200
https://www.sdrplay.com/panadapter-if-i ... from-kd2c/
2: Using a TX to GND switch like the one from MFJ. The model number is MFJ1708SDR version B.
https://www.mfjenterprises.com/Product. ... 1708B-SDRS
If you go with option #2, soldering to the main board of the 1200 is not needed.
1: An IF buffer board fitted within the 1200
https://www.sdrplay.com/panadapter-if-i ... from-kd2c/
2: Using a TX to GND switch like the one from MFJ. The model number is MFJ1708SDR version B.
https://www.mfjenterprises.com/Product. ... 1708B-SDRS
If you go with option #2, soldering to the main board of the 1200 is not needed.
Reason: No reason