dump1090 not working
dump1090 not working
HI all
I have a rsp duo
here are steps I have done
1 API/HW Driver – v3.04 (9th Jul 2019)
2 ADS-B (dump1090) v1.45 (9th Jul 2019)
3 setsdr uno to dual to dual ads-b
4 try bat file get this
Wed Jul 10 11:51:47 2019 CDT dump1090-mutability dump1090_mutability_sdrplay starting up.
Using sample converter: SC16, integer path
Incorrect API version 0.00
sdrplay_api_ReleaseDevice error: sdrplay_api_InvalidParam
Wed Jul 10 11:51:47 2019 CDT Normal exit.
I have a rsp duo
here are steps I have done
1 API/HW Driver – v3.04 (9th Jul 2019)
2 ADS-B (dump1090) v1.45 (9th Jul 2019)
3 setsdr uno to dual to dual ads-b
4 try bat file get this
Wed Jul 10 11:51:47 2019 CDT dump1090-mutability dump1090_mutability_sdrplay starting up.
Using sample converter: SC16, integer path
Incorrect API version 0.00
sdrplay_api_ReleaseDevice error: sdrplay_api_InvalidParam
Wed Jul 10 11:51:47 2019 CDT Normal exit.
Re: dump1090 not working
I would check where you are running dump1090 from - that does not look like 1.45
Best regards,
SDRplay Support
Best regards,
SDRplay Support
Reason: No reason
Re: dump1090 not working
Make sure you are only running dump1090 1.45 - that's the response you will get from any other version of dump1090 with the new API
Best regards,
SDRplay Support
Best regards,
SDRplay Support
Reason: No reason