Frequency Plotter for OS X
Frequency Plotter for OS X
Hi guys,
I finished my SDR based app
It can scan the frequency range and display the graphs. I've checked different ones, by no one was supporting SDRplay, so I wrote my own.
It use Soapy SDR and was tested with my receivers SDRplay, HackRF and RTL-SDR.
I also write ObjectiveC wrapper for the Soapy library, so it can be used in Objective-C/Swift applications.
App is free, sources (Swift/ObjectiveC) and binary are available:
https://github.com/dmitryelj/SDR-Frequency-Plotter-OSX
Screenshot: Any feedback is welcomed.
Next step, I'm going to make the app, that will do schedule recording (will be useful to write NOAA records at night:).
I finished my SDR based app
It can scan the frequency range and display the graphs. I've checked different ones, by no one was supporting SDRplay, so I wrote my own.
It use Soapy SDR and was tested with my receivers SDRplay, HackRF and RTL-SDR.
I also write ObjectiveC wrapper for the Soapy library, so it can be used in Objective-C/Swift applications.
App is free, sources (Swift/ObjectiveC) and binary are available:
https://github.com/dmitryelj/SDR-Frequency-Plotter-OSX
Screenshot: Any feedback is welcomed.
Next step, I'm going to make the app, that will do schedule recording (will be useful to write NOAA records at night:).
Last edited by DVE on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason
Re: Frequency Plotter for OS X
Hi
It crashes because it's searching for a .dylib in a hard-coded path (from your development system)
I've opened an issue on github.
It crashes because it's searching for a .dylib in a hard-coded path (from your development system)
I've opened an issue on github.
Last edited by Sasan on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason
DF2HF, NM9A, EP2C
Re: Frequency Plotter for OS X
Hi,
Problem is, there are no hardcoded paths in the application. It looks like, you need to install SoapySDR in OS X before using the app.
Can you please do this, using the instruction?
1) Download SoapySDR-master.zip from https://github.com/pothosware/SoapySDR (use "download zip")
2) Build using this guide https://github.com/pothosware/SoapySDR/wiki/BuildGuide (see "Unix instructions" section)
Later I'll make GUI installer once
Problem is, there are no hardcoded paths in the application. It looks like, you need to install SoapySDR in OS X before using the app.
Can you please do this, using the instruction?
1) Download SoapySDR-master.zip from https://github.com/pothosware/SoapySDR (use "download zip")
2) Build using this guide https://github.com/pothosware/SoapySDR/wiki/BuildGuide (see "Unix instructions" section)
Later I'll make GUI installer once
Last edited by DVE on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason